The Altair Community is migrating to a new platform to provide a better experience for you. In preparation for the migration, the Altair Community is on read-only mode from October 28 - November 6, 2024. Technical support via cases will continue to work as is. For any urgent requests from Students/Faculty members, please submit the form linked here
Creating operators and extensions inside RapidMiner, without programming
BalazsBarany
Administrator, Moderator, Employee-RapidMiner, RapidMiner Certified Analyst, RapidMiner Certified Expert Posts: 955 
Unicorn
The Custom Operators extension has been presented at RapidMiner Wisdom 2020 and published in the Marketplace.
It allows RapidMiner users to convert existing processes to operators, and bundle these operators to RapidMiner extensions. The extensions can be easily shared with others and even put on the Marketplace when they are mature enough.
An initial set of extensions created with this technique is already available:
Open the process you want to turn into an operator. You'll most like want to define some parameters. These can be operator parameters in your process, or macros created with Set Macro or Boolean/Category Parameter Macro from the Custom Operators extensions.
Test the process thoroughly with different inputs. You will likely connect the inp port to an operator inside the process if your future operator acts on some input. You can use test data by selecting an input in the process context, just remember to remove this before publishing the operator.
When you're ready to create your first operator from the process, click File/Create Custom Operator in the menu. Create a folder on your computer to save the custom operator into. Fill out the Create Custom Operator form. It's a good idea to record your inputs (especially the description and the parameter help texts) for later, for example in a separate text file or on a Wiki page.
Select an icon from the icon search site. The icons there are licensed for usage in RapidMiner.
Go through the list of required parameters that should be exposed. Activate the checkbox for each parameter that you'd like to expose. You can enter the default value for the parameter, and the parameter's short description (optionally including HTML code).
When you're done, click Save. A new file with the extension .cusop will be created in the selected folder. It contains the process definition and the data you entered.
Repeat for a new process if you want to create another operator. If the operators belong together into the same extension, put them into the same folder.
When you're ready to create the extension, select Extensions/Create Custom Extension in the menu. Fill in the data. It's again a good idea to record the inputs somewhere else for the next time.
The extension name is an arbitrary, human readable name. It will be displayed in the Extensions folder in the operator list.
The custom operator folder is the folder you put the custom operators in. If you need to bundle java modules (JAR files) with the extension, put them into a separate folder and enter the path under Jars folder.
Activate "Force dependencies" if you want to put the extension on the Marketplace later.
Click on OK. It will take about a minute to create the extension. RapidMiner will offer to restart with the new extension when it's done. Enjoy your new extension!
It's a good idea to create some test processes with test data to verify that the new version is still working correctly.
When you right-click on a custom extension in RapidMiner Studio, there's an option to open the defining process. You and other users of the custom extension can always look inside to understand how the process works.
You might want to put an icon into the extension. Open the generated extension .jar file with a Zip archive manager and put a PNG file into it, naming it icon.png in the META-INF folder inside the jar archive.
Be careful to enter the correct product ID, it can't be changed later. It is composed of "rmx_" and the name of the extension you have in your RapidMiner extensions folder. If it is called my_extension-1.0.000.jar on your computer, the product ID will be rmx_my_extension.
Fill out the other input fields and confirm that you read the developer agreement (after you read it).
Somebody at RapidMiner will check your submission, usually in a few days. They might contact you with questions.
When the approval process is done, you can select the extension in the menu on the top of the Marketplace page and upload your extension. After the upload you click the Activate link, and your extension is available in the Marketplace! It will be found by the operator search, just like other extensions.
It allows RapidMiner users to convert existing processes to operators, and bundle these operators to RapidMiner extensions. The extensions can be easily shared with others and even put on the Marketplace when they are mature enough.
An initial set of extensions created with this technique is already available:
- Database Envy: Implements two operators for things that are available in databases, and now in RapidMiner: Window functions (groupwise aggregates and rankings) and expression-based joins to join example sets on criteria like inequality or even mathematical expressions.
- GeoProcessing: Finally, geodata processing in RapidMiner! Import data from Shapefiles and GIS databases, transform the geometries and calculate measures like area and distance on them, join on geometry relations and more.
How to create your own extension
Install the Custom Operators extension in your Studio. After restarting Studio, you will see new operators (Extensions/Custom Operators/Parameter Helper) and menu entries (File/Create Custom Operator and Extensions/Create Custom Extension).Open the process you want to turn into an operator. You'll most like want to define some parameters. These can be operator parameters in your process, or macros created with Set Macro or Boolean/Category Parameter Macro from the Custom Operators extensions.
Test the process thoroughly with different inputs. You will likely connect the inp port to an operator inside the process if your future operator acts on some input. You can use test data by selecting an input in the process context, just remember to remove this before publishing the operator.
When you're ready to create your first operator from the process, click File/Create Custom Operator in the menu. Create a folder on your computer to save the custom operator into. Fill out the Create Custom Operator form. It's a good idea to record your inputs (especially the description and the parameter help texts) for later, for example in a separate text file or on a Wiki page.
Select an icon from the icon search site. The icons there are licensed for usage in RapidMiner.
Go through the list of required parameters that should be exposed. Activate the checkbox for each parameter that you'd like to expose. You can enter the default value for the parameter, and the parameter's short description (optionally including HTML code).
When you're done, click Save. A new file with the extension .cusop will be created in the selected folder. It contains the process definition and the data you entered.
Repeat for a new process if you want to create another operator. If the operators belong together into the same extension, put them into the same folder.
When you're ready to create the extension, select Extensions/Create Custom Extension in the menu. Fill in the data. It's again a good idea to record the inputs somewhere else for the next time.
The extension name is an arbitrary, human readable name. It will be displayed in the Extensions folder in the operator list.
The custom operator folder is the folder you put the custom operators in. If you need to bundle java modules (JAR files) with the extension, put them into a separate folder and enter the path under Jars folder.
Activate "Force dependencies" if you want to put the extension on the Marketplace later.
Click on OK. It will take about a minute to create the extension. RapidMiner will offer to restart with the new extension when it's done. Enjoy your new extension!
It's a good idea to create some test processes with test data to verify that the new version is still working correctly.
When you right-click on a custom extension in RapidMiner Studio, there's an option to open the defining process. You and other users of the custom extension can always look inside to understand how the process works.
You might want to put an icon into the extension. Open the generated extension .jar file with a Zip archive manager and put a PNG file into it, naming it icon.png in the META-INF folder inside the jar archive.
Publishing an extension in the Marketplace
When your extension is ready and you want to share it with the RapidMiner community, go to the Marketplace and register there. (This user account is not integrated with the other RapidMiner services.) After registering and confirming the email address, you'll see a link Interested in Sharing? Contact us on the main page.Be careful to enter the correct product ID, it can't be changed later. It is composed of "rmx_" and the name of the extension you have in your RapidMiner extensions folder. If it is called my_extension-1.0.000.jar on your computer, the product ID will be rmx_my_extension.
Fill out the other input fields and confirm that you read the developer agreement (after you read it).
Somebody at RapidMiner will check your submission, usually in a few days. They might contact you with questions.
When the approval process is done, you can select the extension in the menu on the top of the Marketplace page and upload your extension. After the upload you click the Activate link, and your extension is available in the Marketplace! It will be found by the operator search, just like other extensions.
15
Comments
So like an A to Z example of a simple (even dummy) conversion of an existing process in a single / set of operator(s)
I guess I'll create a step by step guide with pictures. Do you have an idea for a new operator that would be simple enough for a tutorial but actually helpful?
Balázs
I'm wondering in this case if I would be able to use parameters of my new operator (or how to do this) to define parameters for operators used within the new operator, like the prune setting or so.
But this goes already fairly deep, so a simple process with one or 2 dummy operators and an understanding how parameters of these can be defined (if this is an option to start with) would already be pretty useful
isnt this what Text Vectorization is doing?
Best,
Martin
Dortmund, Germany
Granted, for my given example the Text Vectorization would do the trick indeed but in reality I need more options, so let's say I'd like to create my own improved operator similar to that one.
Hello
Can we make an operator which works like decompiler? It is useful for doing reverse engineering on files.
Regards
mbs
Custom Operators allows you to create an operator from a RapidMiner process. If you can create a decompiler process, you can convert it to an operator and an extension, and publish it to the marketplace. But I don't think this woud be a good tutorial process.
Regards,
Balázs
I created the tutorial:
https://community.rapidminer.com/discussion/56872/tutorial-for-creating-custom-operators/
I hope it is detailed enough. Feel free to ask questions or clarifications there.
Regards,
Balázs
https://community.rapidminer.com/discussion/56877/tutorial-for-the-geoprocessing-extension
These are the new features:
- Added Attribute Parameter Macro operator which sets a macro to an attribute name that can be selected from a dropdown.
- Fixed
the metadata for parameters that select attributes: Now the metadata is
taken from the custom operator port that is directly connected via
first input ports. If no direct connection is possible, the Attribute
Parameter Macro operator can be used.
- Added a Reload from File button to the Create Custom Operator dialog that allows to reload the information from existing .cusop files.
- Added the option to define which custom parameters should be optional via checkboxes in the Create Custom Operator dialog.
Furthermore, we recommend to additionally install the Rapid Development extension to re(load) custom extensions without restart.Dortmund, Germany